DivisionMaster

Created by: Administrator, Last modification: 08 Nov 2018 (10:44 UTC) by Lester Caine

Following an arrangement with Tony Jeffree we now have a kit version of the DivisionMaster digital indexer. This are available in several levels of build, from a basic set of boards with pre-programmed processor, to a full kit including everything you need to build it, or a fully finished controller. Tony's original site is still accessible and has some useful examples of using the divisionmaster.

Top View Angled
DMComplete 

The Construction Guide DivisionmasterConstructionGuide is available to download so you can see what is involved in building one. This has been updated with some additional information suggested by the early builders of the kit..
Finally developed a fuller Rotary Table CNC Options document, and you can review the 6inch Rotary Table Conversion Guide for more details on converting as well as the 8inch Rotary Table Conversion Guide but both of these do need bringing up to date.

Please check the bottom of the list for the extra shipping costs outside the United Kingdom

DMPCBs DivisionMaster PCB Kit
Kit consists of a pair of printed circuit boards and a programmed PIC
Documentation for building can be found here
£60.00
DMFullKit DivisionMaster Full Kit
Everything you need to build the controller box.
£190.00
DMComplete DivisionMaster Assembled Unit
Built to order - please allow a few days before shipment
This unit is DC powered and needs an external 24V supply such as the power pack below.
£250.00

Please allow a week or so for delivery.
PSU-24V2A5 24V 2.5A Switchmode Powerpack
PSC-Fig8-UK PSC-Fig8-Euro  PSC-Fig8-USA
£38.00
Mains Lead
DMS7 DivisionMaster Super Unit
DivisionMaster Super unit with larger backlit display and an integral 4.2Amp driver with 45V 160W Power Supply all built into a 22cm by 14.6cm by 10cm diecast box
Built to order - please allow a few days before shipment
£380.00
Mains Lead

Please allow a week or so for delivery.
DivisionmasterConstructionGuideMk2 Bound Hard Copy of the construction guide including a set of schematics
and a copy of the user manual DivisionmasterManual-LSCES
£8.00
Guide to choosing a stepper motor Guides - 6inch Rotary Table Conversion Guide, 8inch Rotary Table Conversion Guide    
Myford Lathe Attachment

Hemingway Kits provide a suitable conversion for the Super 7 and ML7 to directly drive the bull wheel. Their VHD Upgrade Kit which can be adapted to take a NEMA23 stepper motor.

   
4-6MotorMount 4" to 6" Tables - Vertex HV4 (4"), Homge HHV150, Myford and Vertex HV6 (6" ) - For NEMA23 Motor
Select the shaft sizes for your motor and table before ordering.

The kit is supplied with a torque plate and two shaft plates of the correct size for the coupling.
£75.00
Motor Shaft
Table Shaft
180NcmMotor Assembly NEMA23 220Ncm Stepper Motor ready configured for use with the DivisionMaster and the 4" to 6" Table Adapter. 2mt Lead.
Wired series mode for 2.1Amp rating to match the Standard DivisionMaster

Motor Assembly Details
£55.00
3NmStepperMotorAssembly NEMA23 310Ncm Stepper Motor ready configured for use with the DivisionMaster and the 4" to 6" Table Adapter. 2mt Lead.

See 180Ncm Motor Assembly Details for example ... updated crib sheet to follow.
£70.00
       
 

European Insured Delivery ( International Signed For )
For DivisionMaster or Kit ... Additional parts shipping will be quoted - please email

£15.00
  Overseas Insured Delivery
Rest of world outside Europe ( International Signed For )
For DivisionMaster or Kit ... Additional parts shipping will be quoted - please email
£30.00


Shipping will be added to the order up to £10.00 - please add the additional shipping for Europe (outside the UK) or the Rest of the World.
Paypal will produce a total in your preferred currency at the current conversion rate.

Contact me direct for alternative prices, packages, or the additional parts listed in the complete parts list Lester Caine